Wastewater Processing

Jita Oy manufactures products for the soil treatment of wastewater. Soil permeability is often so poor that the system is constructed entirely as a buried sand filter from screened soil. This means that subsoil is not used at all, but the landmasses are changed and the drainpipes installed lowest in the field. If the permeability of the soil is sufficient, infiltration alone may also be considered. In infiltration, the water pre-processed in the septic tanks is recharged directly into the foundation soil, which purifies the water as it runs through the soil.

Cesspool Neliapila, 5.500 L (967515)
The cesspool package contains a 5,500 l cesspool and a wireless filling alarm and sensor. The tank can be used for instance at beach areas for storaging wastewaters from toilets and other sources. With its inlet sewer at a height of only 1.25 m from the bottom of the tank, the Neliapila cesspool is one of the lowest in its size class. 

For greywater infiltration: Jita II-1500 (967502)
The Jita II-1500 package includes all the required supplies for the two-line infiltration field for greywater: 

  • 1 two-compartment septic tank (1,500 l) with flow regulators (two 110 mm outlets)
  • 11 infiltration pipes (110 x 2,400 mm)
  • 4 solid pipes (110 x 2,400 mm)
  • 4 pipe bends 110 mm, 0–90 degrees 
  • 2 ventilation covers
  • 1 filter cloth, approx. 35 m2 

 

For the infiltration of all waters – Jita I-2500 (967504)
The Jita II-2500 package includes all the required supplies for the two-line infiltration field for all waters:

  • 1 three-compartment septic tank (2,500 l) with a T piece (one 110 mm outlet)
  • 1 distribution well (315 x 1,200 mm) with flow regulators (two 110 mm outlets)
  • 11 infiltration pipes (110 x 2,400 mm)
  • 4 solid pipes (110 x 2,400 mm)
  • 4 pipe bends 110 mm, 0–90 degrees 
  • 2 ventilation covers
  • 1 filter cloth, approx. 35 m2

Accessories for soil filtering: Jita III (967503)
With the Jita III package, you can upgrade your Jita I and Jita II packages from infiltration packages to a buried sand filter.
The package contains the following supplies: 

  • 11 drain pipes (110 x 2,400 mm)
  • 5 solid pipes (110 x 2,400 mm)
  • 4 pipe bends 110 mm, 0–90 degrees
  • 2 ventilation covers
  • 1 collector well 315 x 2,200 mm (two 110 mm inlets)